Jetex.org - Jetex Beginners Model - JETEX PLANS


  You are here: Home / JETEX 150 / Jetex Beginners Model

Advanced Plan Search
User Panel
Username:

Password:

Log me on automatically next visit?

» Forgot password

 New Users

» Click here to Register!
 
Random Plan

GLOSTER JAVELIN
GLOSTER JAVELIN


 Plans with Great Build Guides

 »  HAWKER P-1081

 »  CUTLASS F7U-3

 



Jetex Beginners Model
Jetex Beginners Model

            

Jetex Beginners Model
Wing span: 32 Inches
Designed By: Brent Hawkins
Description: Looking for a simple-to-build Jetex powered F/F? Try this contest proved design (took a Nats' 3rd, with a time of 6:18.4). Making working plans of this model is a cinch - all curved part patterns are provided full size. Begin by drawing fuselage side-view "base-line" and trace or pin-prick the nose pattern on left end of this line. Measure distance (as noted) between rear of former 2 and 1/16" x 1/2" x 11/16" ends-joiner, add the end pattern (at right). Cut two 5/8" wide strips of 1/16" sheet for top and bottom - tapering towards tail as indicated. Draw up wings and stab rectangular outlines, add ribs at regular intervals, followed by spar locations. Best flight pattern is to the left on both power and glide. Remember to light that D/T fuse ... this ship is a real floater!
Keywords: beginners model jetex 150 brent hawkins
Hits: 2179
Downloads: 10
Rating: 0.00 (0 Vote(s))
 



Previous plans:
   JET PAA-LOAD  
 Next plan:
JETSET